Slatted transparent rolling shutter door installation steps

The installation steps of the transparent shutter door are mainly divided into the following links:

1. Determine the installation position: according to the size of the door, determine the installation position and height of the slatted transparent shutter door, and mark the installation mark.

2. Install the door frame: Install the door frame on the door hole and secure it with expansion screws. The size of the door frame should match the size of the door hole, and ensure that the door frame is perpendicular to the ground.

3. Install the door fan: Install the door fan of the slatted transparent rolling shutter door on the door frame and fix it with screws. The size of the door blade should match the size of the door frame, and ensure that the door blade and the door frame are tightly fitted.

4. Install the motor and chain: Fix the motor on the motherboard and connect the chain to the wheels and the motor base gear. The installation position of the motor should be adjusted according to the position and height of the door to ensure the normal operation of the motor.

5. Install the remote control: Connect the remote control to the motor and debug it to ensure that the remote control can normally control the opening and closing of the door.

6. Install the door lock: Install the door lock as required, and ensure that the door lock can work properly.

7. Install the door head: Install the door head on the top of the door frame and secure it with screws. The size of the door head should match the size of the door frame, and ensure that the door head and the door frame are tightly fitted.

8. Install the curtain: Install the curtain of the slatted transparent rolling curtain door on the door and fix it with screws. The size of the curtain should match the size of the door, and ensure that the curtain and the door are tightly fitted.

9. Debugging and testing: debug the motor and remote control to ensure that the door can be opened and closed normally. Test the fastness of the lock and door head to ensure that the door is not deformed or damaged during opening and closing.

10. Installation completion: After the installation is completed, it is necessary to note that the standard voltage of the crystal shutter door is 220V, no one is allowed to stop at the bottom, there must be no obstacles when the door is closed, and do not let people and vehicles pass when running.

The above is the installation procedure of the transparent shutter door. In the installation process, you need to pay attention to safety and operate according to the installation instructions.